SCS – HYCCT Challenge » fresh & fun

Peek-a-boo

Copics, Nestabilities, SCS - HYCCT Challenge, The Crafter's Companion, Want2Scrap 16 Responses »

Oct 082011

Thursday’s HYCCT challenge hostess was the wonderful Bev Gerard, aka. Texasgrammy. Bev asked us to create a card with a window. I had just received this Popcorn Bear image that has a front and back and thought it would be a great for this challenge.

I stamped both the front and back in Tuxedo Black Memento Black on Neenah Solar White cardstock, colored them with Copic Markers (Fur: E0000, E30, E31, E33 Flower: RV21, R20, R21 , R22, G21, G24, G28 Blanket: Y21, Y23, YR23, YR24, E39, E29) and cut them out.

A 2 1/8″ x 4 1/2″ piece of MME Lost & Found Market Street was adhered to a 4 1/2″ square of the same paper pack. A window was cut through it with a Classic Circle Nestabilities die. The layers were stitched to a 4 3/4″ square of white cardstock and then the same die was used to cut the circle window through that layer as well.

The card base is a 5″ x 10 piece of Textured Kraft cardstock. It was scored in half. The layers were adhered with repositionable adhesive and the die was used to cut the window in the card front. The cut didn’t go through all three layers, so after I ran it through once, I took the other layers off. I placed the die on the impression it left through the first run through the die cut machine and cut the window into the card base.

A piece of white cardstock was cut with the largest Heart Circle Die and a Classic Circle die to create a frame for my window. It was adhered with dimensional to the window. Baby Rhinestone Bling pieces were added under each heart. A Rhinestone swirl was cut apart. Part was adhered to the upper right, another to the lower left of the card front.

The sentiment is also from the Popcorn Bear set. It was stamped on a piece of white cardstock, cut and embossed with the smallest Petite Oval Nestabilities. The center was airbrushed with Copic Marker Y21. The flower from the main image was stamped to the left side of the oval with Scattered Straw Distress Ink and the sentiment was stamped in Tuxedo Black Memento ink.

For the left inside of the card I cut another frame like the one in the front. The bear was adhered on the front top and the bottom on the inside. On the right side two small strips of patterned paper were stitched to the lower half of a 4 3/4″ square of white cardstock .

Thanks so much for stopping by! I hope you have time this month to make at least one card for the HYCCT challenges and send it to the hospital. Have a wonderful day!

Hugs and smiles

Minty Fresh Stella

Copics, Grand Nestabilities, Nestabilities, SCS - HYCCT Challenge, Sweet 'n Sassy Stamps, The Greeting Farm, Want2Scrap 11 Responses »

Oct 072011

Isn’t this image darling? I used Stella from The Greeting Farm for Jimmi’s Hope You Can Cling To Challenge. She gave us this sketch to use.

I new I wanted to use Stella and new dies and build my card around that. I started by stamping the image in Tuxedo Black Memento Ink on Neenah Solar White cardstock. It was colored with Copic Markers ( Skin: E0000, E00, E01, BV00 Hair: YR24, E39, E29 Dress: G0000, G00, C2 Heart and shoes: RV00, RV10, RV13).

A piece of MME Lost & Found Two Blush Paper was cut and embossed on Classic Circle Nestabilities dies. It was stitched to black cardstock piece that had been cut and embossed with the next size circle die. A piece of white cardstock was cut and embossed with the largest of the Tear Drop Circle Dies. Pink Baby Bling Rhinestones were added between each tear drop. Stella was cut out and adhered to the center of the circles with dimensionals.

A 4 3/4″ square of Blush paper was stitched to a 3/16″ bigger piece of black cardstock. A 4 1/8″ mint green square of Blush cardstock was cut in half diagonally. It was stitched to a slightly bigger white cardstock triangle. A black cardstock was cut and embossed with the Lace Doily Accents Border die. The strip was adhered under the triangle layers before those were adhered to the lower left of the card front.

Before the image was adhered to the layers with dimensionals, pink silk ribbon was run through one of the tear drops and tied around the layers. The bow was topped with a button that was tied on with embroidery floss. A black Rhinestone Flourish was cut apart and adhered to the lower left and upper right of the layers.

The card base was cut and embossed with one of the Grand Scallop Square Nestabilities die out of Whitewash Core’dination cardstock. A sentiment from Sweet ‘n Sassy Stamps Simple Pleasures was stamped in Tuxedo Black Memento Ink on a white cardstock piece, cut and embossed with Classic Circle dies. It was layered on a slightly bigger black cardstock circle, adhered to the lower right of the main image. Pink Baby Bling was added underneath.

The inside of the card was kept pretty simple. Extra pieces of Blush paper were adhered to a 4 1/2″ square of white cardstock before they were stitched to a 1/4″ bigger piece of black cardstock. Another part of the black Rhinestone swirl was adhered to the lower right of the layers.

Thanks so much for stopping by! Have a wonderful day!
Hugs and smiles

Count the Moments

Copics, Nestabilities, SCS - HYCCT Challenge, Sweet 'n Sassy Stamps 18 Responses »

Oct 062011

I created this card for a Hope You Can Cling To Challenge on Splitcoaststampers. I was the hostess and my challenge was to create a circle card. It was also the first card I shared at the Sweet ‘n Sassy Stamps blog. I am excited to be the Guest Designer there this month.

The card base was cut with the largest of the Large Scallop Circle Nestabilities dies out of Pink Pirouette cardstock. Patterned paper from the Echo Park Victoria Garden pack was cut with a Classic Circle Nestabilities die. Before it was stitched to a slightly bigger white cardstock circle, May Arts Crochet Lace was taped under the horizontal layer.

The sentiment is from Everyday Miracles. It was stamped in Tuxedo Black Memento Ink on Neenah Solar White cardstock. The sentiment was cut and embossed with a Classic Circle Nestabilities die. One of the butterflies from the same set was partially stamped on the sentiment circle in second generation Shabby Shutter Distress ink. The sentiment was adhered to a slightly bigger pink layer cut with one of the Large Scallop Circle Nestabilities dies.

The butterfly that was used in the sentiment panel was stamped again on a piece of Victoria Garden Echo Park paper with Tuxedo Black Memento Ink. The butterfly was cut out and colored with Copic Markers (RV10, R43, R46 and E27). It was adhered to the lower left of the sentiment panel. Stardust Stickles was added to the darker parts of the wings and Glossy Accents to the body.

Red Kaisercraft Pearls finish off the card! Thanks so much for stopping by! Have a wonderful day!
Hugs and smiles

Tutorial on SCS - Double Z Fold Card

Nestabilities, SCS - HYCCT Challenge, Tutorials, Verve Stamps, Video Tutorial, Want2Scrap 13 Responses »

Oct 052011

Today’s tutorial on Splitcoast is for the Double Z-Fold card. It looks like a Gatefold card closed, but has another fold to it when you open it up. I think it’s a great fold for invitations.

My card base is a 5 1/4″ x 12″ piece of Textured Kraft cardstock scored at 2″, 4″, 8″ and 10″. 1 1/2″ x 4 3/4″ pieces of My Mind’s Eye Lost & Found Two Blush paper were stitched to a 1/4″ bigger piece of Neenah Solar White cardstock before they were adhered to the card base panels.A Rhinestone swirl was cut apart. Part was adhered to the upper right, the rest to the lower left of the card base.

A piece of white cardstock was cut and embossed with one of the Beaded Circle Nestabilities dies. It was sponged with Spun Sugar Distress ink before a sentiment from Verve Believe Stamp set was stamped in its center with Rich Cocoa Memento ink. A medium sized flower was stamped over the panel twice with Spun Sugar for a more textured look.

White Silk Ribbon was tied around the card before the sentiment panel was adhered with dimensionals. Baby Bling Rhinestones on the upper left hand side of the sentiment panel finish off the card front.

The inside is very simple. A 2″ x 3 3/4″ strip of Blush Paper was stitched to a 3 3/4″ x 5″ piece of white cardstock.

Here is a video for the visual learner:

Thanks so much for stopping by! Have a wonderful day!
Hugs and smiles

Timeless Tuesday - Fall Inspiration

Flourishes - Timeless Tuesday, Nestabilities, SCS - HYCCT Challenge 42 Responses »

Oct 042011

Heather is the hostess for today’s Timeless Tuesday challenge. She wants us to be inspired by this photo:

I picked the stairs and the gorgeous yellow/orange colors along with color of the steps. I had never created a Center Step card before and tought this would be a great time to try it out.

I created the card base out of a 5 1/2″ x 11″ piece of Kraft Cardstock. I cut and scored it just as Frances showed us in this tutorial. I cut Neenah White cardstock to make slightly smaller layers for the center and side panels and topped those with My Mind’s Eye Lost & Found Two Sunshine patterned paper.

A 6 1/2″ wide strip of white cardstock was cut and embossed with Edgeabilities dies (Triple Scallop and Classic Petal). The strip was then sponged with Wild Honey Distress ink. The big flower head from Sweet Nature was stamped over in the same color. The strip was adhered to the lower part of the card.

For the center piece I cut a Kraft cardstock, more Sunshine paper as well as a piece of white cardstock with Ornate Artisan Tags & Accents dies. The largest frame was sponged with Vintage Photo Distress ink. The Sunshine paper was sanded before it was adhered to the Kraftstock panel.

The white panel was sponged with Wild Honey Distress ink. A sentiment from Sweet Nature was stamped in the tags center with Tuxedo Black Memento Ink. The big flower head stamp was used again to add some texture to the sponged part of the tag. The tag was adhered to the card other layers with dimensionals.

To finish the card off two flourishes from the same die pack out of white cardstock. Again Wild Honey was used to sponge the cardstock. The flourishes were adhered to the thin side panel.

This card also works for today’s HYCCT challenge on SCS. That’s why there is no ribbon, rhinestones or pearls on it.

Please check out my fellow Timeless Tuesday Challenge Team members:

Cindy Haffner
Heather Jensen
Silke Ledlow
Tammy Hershberger

Bring Back Beautiful Members:

Mona Pendleton
Iwona Palamountain

October Guest Designer Rosemary Dennis

I hope you have time to participate in the challenges. Have a wonderful day!
Hugs and smiles

HYCCT1102 - You're my Inspiration!

Flourishes, LLC, Grand Nestabilities, Nestabilities, SCS - HYCCT Challenge, Want2Scrap 7 Responses »

Oct 022011

Today’s Hope you can Cling to Challenge is an inspiration challenge. Lee picked this fun cupcake photo as our inspiration piece.

As soon as I saw it I knew I wanted to try out my Wonky Rectangle dies on a circle card.

I started by cutting a piece of MME Lost & Found Two Blush paper with the largest of the Wonky Rectangle die and sanded the edges. Then I checked what kind of circle size I needed. The regular circles were too small, but the smallest of the Grand Circle Nestabilities seemed perfect. Another piece of Blush Paper was cut and embossed with that die and stitched to a slightly bigger piece of black cardstock, that had been hand cut.

A sentiment from Flourishes Zinnias stamp set was stamped in Tuxedo Black Memento Ink on a piece of Neenah Solar White cardstock that had been cut and embossed with one of the Fancy Tag three dies. With the die over the cut cardstock, the center of the tag was sponged and the Zinnia head of that stamp set was stamped over the lower left side with Spun Sugar Distress ink.

A hole was punched in the wonky rectangle and the stitched layers before the rectangle was adhered to the circle layers with dimensionals. White Organdy Ribbon was threaded through the holes, tied into a bow and topped with a Basic Grey Button and Linen thread. The sentiment layer was adhered over the rectangle with dimensionals.

The card base is Kraft cardstock (Stampin’ Up!) that was cut and embossed with one of the Grand Scallop Circle Nestabilities dies. After the layers were adhered to the card base, the card front was finished off with parts of a Finesse Pearl Swirl.

For the inside of the card another piece of white cardstock with matching patterned paper was cut and embossed with the same Circle die used for the front layers. Again the circle were stitched to a piece of black cardstock that had been hand cut in a slightly bigger circle. Another sentiment from the Zinnia set was stamped to the upper right edge of the patterned paper. Part of a pearl swirl finishes off the inside of the card.

I hope you have time to play! I can’t wait to send a big box of cards to the hospital at the end of the month.

Have a wonderful Sunday!
Hugs and smiles

Hope You can Cling To Challenges

CAS, Nestabilities, SCS - HYCCT Challenge, Taylored Expressions 7 Responses »

Oct 012011

It’s the first of October, that means it’s Breast Cancer Awareness Month. For the second year in a row Splitcoaststampers is hosting at least one challenge a day. We call it Hope You Can Cling To Challenges. We have sponsors and prizes….so head on over there and check it out. We work with a hospital in Austin and ask that all the cards made for the challenges will be sent to that hospital. Last year 2100 cards were sent to that hospital. We are hoping to beat that this year.

Today starts out with a bang and three challenges. Lori, Lydia and I are hostesses. I will blog about my challenge card later next week. Today I want to show you my entry for Lydia’s challenge. Her challenge is to use a pink animal somewhere on your card.

I decided to use Taylored Expressions Summer Afternoon stamp set for that. I started by stamping the frame image in Coffee Archival ink on Victoria Garden Echo Park Paper. It was cut out with a Classic Circle Nestabilities die, layered first on a slightly bigger white cardstock circle, then on a piece of Canyon Brown cardstock, cut and embossed with a Floral Doily Motif die.

A sentiment from the same set was stamped in Coffee ink on Neenah Solar White cardstock and cut and embossed with a circle die. The dragonfly stamp from that set was inked with the Ballerina Pink Watercolor Marker (Inkadinkado) and stamped on the upper right hand side of that sentiment panel. The circle was adhered with dimensionals in the center of the frame.

The card base is a 4 1/4″ x 11″ piece of Solar White cardstock folded in half. The lower corners were rounded and the upper half of the card was dry embossed with a Polka Dot embossing folder.

A 4 1/4″ long strip of canyon brown cardstock was cut and embossed with the border die from the Floral Doily Accents pack. It was stitched under a 3 1/2″ x 4 1/4″ piece of Victorian Garden paper. White Organdy ribbon was tied around the panel and topped with a button. The paper layer was adhered to the card base and the sentiment layers were adhered on top with dimensionals.

I hope you have time to play with us in these challenges. I hope to make at least 15 cards to send to the hospital.

Thank you so much for stopping by! Have a wonderful day!
Hugs and smiles